Ceiling fans are the lighting job Brisbane customers search for most, and the first question is where the fan will hang. Whether a fan can use the existing light point is a question to raise with Tom when you ask for a quote. Queensland's Electrical Safety Office lists replacing a light fitting with a ceiling fan among the jobs to leave to a licensed electrician, because installing or replacing electrical equipment is electrical work under the Electrical Safety Act 2002. A fan generally uses much less electricity than air conditioning, though some rooms still need a split system, which Tom installs too.
Halogen downlights are the other common call. According to the Australian Government, LEDs use about 75% less energy than halogen globes and last 5 to 10 times longer. For a landlord with a hallway of downlights or a shop with high ceilings, fewer globe changes matter as much as the power bill.
What sits above the ceiling matters most. Queensland fire authorities warn that insulation placed on top of, or too close to, halogen downlights is among the common causes of roof fires, and they advise having an electrician inspect rather than the homeowner. The wiring rules set minimum clearances between thermal insulation and recessed lights, including LED downlights, and the Electrical Safety Regulation 2026 requires ceiling insulation to be installed in line with that clause. Not every downlight is suited to sitting against insulation, so the fitting has to be chosen to suit what is in the roof space; if you know whether yours is insulated, mention it when you ask for a quote.
Smoke alarms are the detail most lighting jobs miss. Under the Building Fire Safety Regulation 2008, an alarm must not sit within 300mm of a light fitting or within 400mm of the blades of a ceiling fan. Because Tom also installs smoke alarms, he can position new downlights and fans clear of them, or move an alarm, in the same visit.
Under the Electrical Safety Regulation 2026, the licensed electrician and the business doing the work must make sure the installation complies with the wiring rules (AS/NZS 3000) to the extent the work affects it. That is the standard every fan and fitting Tom installs is wired to.