Skip to content

Smoke alarm installation in North Brisbane and Pine Rivers

Photoelectric, interconnected alarms for homes and rentals across Pine Rivers and North Brisbane, installed by an electrician based in Warner.

From 1 January 2027, every existing house, townhouse and unit in Queensland must have photoelectric smoke alarms that are interconnected, so one alarm sounding sets off the rest. The deadline is fixed at 1 January 2027, and homes being sold or newly leased already have to meet the full standard. Tom's Air Conditioning & Electrical, based at 10 Jacksonia Drive in Warner, installs and replaces hardwired and wireless-linked photoelectric alarms for homeowners, landlords and property managers across Pine Rivers and North Brisbane. Tom checks your layout first, because the number of alarms depends on your bedrooms, hallways and storeys. Call 0401 456 987 for availability or request a free quote below.

Licence REC 135414.7 from 12 Google reviews

Get a free quote

Tell Tom about the job and he will call you back with a written price.

Free written quote. No call centre, Tom calls you back.

About smoke alarm installation

A ceiling alarm that still chirps is not the same as a compliant one. Queensland requires each alarm to meet AS 3786-2014, use a photoelectric sensor and contain no ionisation sensor, to be linked with every other alarm in the home, and to be replaced within 10 years of its manufacture date. Plenty of homes around Strathpine, Petrie and Albany Creek may still carry alarms fitted under earlier rules, so for most owners the real question is not whether to upgrade but how many alarms the layout needs and where they can legally go. That is the work this page covers.

Why Tom's Air Conditioning & Electrical for smoke alarm installation

Moreton Bay City Council, which covers Warner, Strathpine, Petrie and the rest of the Pine Rivers district, gives its residents the same message as the state: all new and existing homes, townhouses and units need interconnected photoelectric alarms by 1 January 2027, and homes may no longer be fitted with an alarm that uses an ionisation sensor, whether on its own or paired with photoelectric sensing. For owner-occupiers who have not acted yet, that leaves a short window in late 2026 to book the work.

Sellers and landlords are on an earlier clock. Since 1 January 2022, a home must meet the full requirements when the owner signs an agreement to sell it, or when a new tenancy starts or an existing one is renewed. Landlords also have to test each alarm and replace flat or nearly flat batteries within 30 days before a lease starts or renews, and that duty cannot be handed to the tenant. A Pine Rivers rental turning over in December therefore needs compliant alarms before the lease is signed, not by January.

The work itself is more regulated than many people expect. Alarms go in every bedroom, in the hallway linking bedrooms on each storey that has them, and on the likely exit path on storeys without bedrooms. On the ceiling they must sit at least 300mm from light fittings and wall corners, and at least 400mm from an air conditioner or forced-air outlet and from ceiling fan blades. That last clearance is where Tom's other trade matters. As an electrician who also installs split systems, he can set out alarm positions around existing indoor units and ceiling fans, and around an AC head you plan to add later, so one job does not undo the other.

Power is the other decision. The law allows either hardwiring to the home's supply or a sealed battery built to last at least 10 years. If an existing alarm is hardwired, though, its replacement must be hardwired too, and hardwired 240V alarms must be installed by a licensed electrician. Tom handles those hardwired points and can link them with wireless alarms where running new cable is impractical, since existing homes may mix 240V and battery alarms with wired and wireless interconnection. His free quote is built on what the inspection finds: how many alarms the layout needs, which points are hardwired, and the ceiling access involved.

Get a free quote

Smoke Alarm Installation: what to know

Ionisation or combination alarms still on the ceiling

Older alarms often used ionisation sensors, and some units combine ionisation and photoelectric sensing; Queensland now requires a photoelectric sensor with no ionisation sensor at all, and Moreton Bay City Council notes these older types can no longer be installed in homes.

An ionisation or combination alarm does not comply even if it still sounds when you press test, so a home can look covered and still fail the 2027 requirement.

Tom reads the label on each alarm for the AS 3786-2014 marking and the sensor type, and replaces any unit that does not meet the regulation with a photoelectric alarm.

Alarms that work on their own but are not linked

Standalone alarms were common in older installations, but the law now requires every alarm in the dwelling to be interconnected with every other alarm.

Adding one new linked alarm to an unlinked set does not make the home compliant; when one alarm detects smoke, all of them must sound.

Tom upgrades the home as one system, using wired or wireless interconnection to suit the ceiling space and existing wiring.

Too few alarms for the home's layout

The required locations now include every bedroom, the hallway joining bedrooms on each storey that has them, and the likely exit path on storeys without bedrooms.

A two-storey home with several bedrooms can need well over the two or three alarms it was built with, and a quote based on the old count will not meet the law.

Tom walks through the home before quoting so the alarm count matches the floor plan, not the number of alarms already on the ceiling.

Alarms sitting too close to split systems, fans or lights

Where a bedroom has a split system head, a ceiling fan and a light, alarms are sometimes placed without measuring the distance to each of them.

An alarm within 400mm of an air conditioner outlet or ceiling fan blades, or within 300mm of a light fitting or a ceiling-wall corner, is in a position the regulation does not allow.

Because Tom also installs split systems, he sets out alarm positions with existing and planned AC heads and fans in mind, so a later aircon job does not push an alarm out of compliance.

Hardwired alarms swapped for battery units

Sealed 10-year wireless alarms are sold for self-installation and are legal in many positions, so owners sometimes replace a wired alarm with one.

Where the alarm being replaced was hardwired to the home's supply, the law requires the replacement to be hardwired as well.

Tom replaces hardwired points with hardwired photoelectric alarms with battery backup, the licensed electrical work these points need, and issues a certificate of testing for that work.

Alarms past their 10-year date

The manufacture date is printed on the alarm body and is easy to forget once the alarm is up on the ceiling.

An owner must replace an alarm within 10 years of its manufacture date, and straight away if it fails when tested, regardless of the 2027 deadline.

Tom checks the date on every alarm during the inspection and fits new alarms made less than 10 years before installation, as the law requires.

The jobs Tom does most

01

Photoelectric smoke alarm upgrades

Supply and installation of interconnected photoelectric smoke alarms to the Queensland requirements.

For a Pine Rivers home that still has two or three older alarms, the upgrade often means adding alarms in each bedroom and hallway so the layout meets Queensland's location rules ahead of the 1 January 2027 date Moreton Bay City Council gives residents for interconnected photoelectric alarms.

Request a free quote

02

Hardwired alarm replacement

Replacement of 240V hardwired smoke alarms with hardwired photoelectric alarms with battery backup.

Where your existing alarms are wired into the ceiling, the replacements must be hardwired too, which is licensed electrician work rather than a DIY swap.

Request a free quote

03

Wireless interconnection

Wireless linking of smoke alarms where running new cable through the ceiling is impractical.

Handy in two-storey homes where cabling between levels is hard; existing Queensland homes may mix 240V and battery alarms with wired and wireless links.

Request a free quote

04

Sale and rental compliance

Smoke alarm work and paperwork ahead of a property sale or a new or renewed lease.

Sellers must comply when they sign the sale agreement and landlords when a lease starts or renews, so book before the contract date and ask Tom what his paperwork covers for your agent.

Request a free quote

05

Alarm placement planning

Setting out alarm positions to the Queensland location and clearance rules.

Tom measures the 400mm clearance to split system outlets and ceiling fan blades, which matters in bedrooms that have both.

Request a free quote

A licence number you can look up

Tom's Air Conditioning & Electrical publishes Queensland electrical contractor licence REC 13541, and you can check the name and status yourself on the WorkSafe Queensland electrical licence search before booking. That matters on this job, because hardwired 240V smoke alarms must be installed by a licensed electrician, who issues a certificate of testing for the work. The business's about page says Tom is licensed as an electrician, also works as an air conditioning technician, and brings more than 15 years of practical trade experience. The business runs from a single base at 10 Jacksonia Drive, Warner, and serves Bray Park, Strathpine, Lawnton, Brendale, Petrie, Joyner, Cashmere, Eatons Hill, Albany Creek and the wider northside. Quotes are free, and the business says its pricing is upfront with no hidden fees. Google reviewers, writing about air conditioning work rather than smoke alarms, describe Tom as on time, quick to find the problem, knowledgeable and transparent about pricing.

  • Queensland Electrical Contractor

    Registered electrical contractor in Queensland, licence REC 13541, listed on the Electrical Safety Office licence search.

    Check the licence
  • Smoke alarm compliance

    Smoke alarm installs to the Queensland legislation: photoelectric, interconnected, and to AS 3786.

    Read the Queensland rules

Smoke Alarm Installation questions

Something not covered? Call Tom on 0401 456 987.

Do I need an electrician to install smoke alarms in Queensland?

Not always. Sealed wireless alarms with a non-removable 10-year battery need no electrical work and can be installed by the owner. Hardwired 240V alarms must be installed by a licensed electrician, and if an existing alarm is hardwired, its replacement must be hardwired too. If your home has some of each, Tom can replace the hardwired points and link them with wireless alarms across the rest of the house.

How many smoke alarms does my house need?

It depends on the layout, not a set number. Queensland requires an alarm in every bedroom, in the hallway connecting bedrooms on each storey that has them, and on the most likely exit path on any storey without bedrooms. A two-storey home with four bedrooms will need noticeably more than a single-level unit. Tom walks through the home before quoting so the count matches your floor plan.

I'm selling or leasing my Strathpine home. Do the new rules already apply?

Yes, and they have since 2022. A home must meet the full smoke alarm requirements when the owner enters an agreement to sell it, or when a new tenancy starts or an existing one is renewed. For leases, the lessor must also test every alarm and replace flat or nearly flat batteries within 30 days before the tenancy begins or renews. Book the work before the contract or lease is signed by calling 0401 456 987.

Can a smoke alarm go near my split system?

Only with the right clearance. A smoke alarm must not be within 400mm of an air conditioner or forced-air outlet, or within 400mm of ceiling fan blades, and must sit at least 300mm from light fittings. Because Tom also installs split systems, he can position alarms around your existing indoor units and around any aircon you plan to add, so a later install does not leave an alarm in the wrong place.

How can I tell if my current smoke alarms comply?

Check three things on each alarm body. The label should state compliance with AS 3786-2014, the sensor must be photoelectric with no ionisation sensor, and the manufacture date must be less than 10 years ago. Then press test: if one alarm sounds alone instead of setting off the others, the set is not interconnected as the law requires. Any alarm that fails a test must be replaced straight away.

What happens if my home is not compliant by 1 January 2027?

You would be in breach of an owner's legal duty, and the Fire Services Act 1990 sets a maximum penalty for each offence. The duty continues after the deadline too: alarms must be replaced within 10 years of manufacture, and immediately if they fail a test. With the deadline set at 1 January 2027, it makes sense to book an inspection now rather than over the holiday period. Call 0401 456 987 for availability.

How should I look after new smoke alarms?

Test them every month and keep them clean, as the Queensland Fire Department advises: vacuum or brush away dust and insects, and never paint over or cover an alarm. Tenants in a rental must test and clean alarms at least once every 12 months, which is the legal minimum rather than the recommended routine. QFD also recommends making and practising a home fire escape plan with everyone in the house.

Get a quote for smoke alarm installation

Tell Tom about the job and he will call you back with a written price.

Sources

Need smoke alarm installation?

The deadline is 1 January 2027, and if you are listing a home or renewing a lease in Warner, Bray Park or Lawnton, the rules already apply when the contract or tenancy is signed. Call Tom on 0401 456 987 for availability, or use the form below for a free quote. Tell him how many bedrooms and storeys the home has, whether the current alarms are wired into the ceiling, and whether a split system is in place or planned, so the quote reflects the real job.

Call Tom on 0401 456 987