Skip to content

Light switch and power point installation in North Brisbane

Licensed work for homes, rentals and small businesses across Pine Rivers and North Brisbane, from an electrician based in Warner.

A power point that has browned around the pins, or a light switch plate that shifts when you press it, is worth taking out of use until an electrician has looked behind it. In Queensland, replacing or adding a fixed switch or power point is licensed electrical work, even a like-for-like swap. Tom's Air Conditioning & Electrical replaces worn and damaged fittings, upgrades old ones and installs new points and switches across Pine Rivers and North Brisbane, from its Warner base. A licensed electrician can only work on a home's power points if a safety switch protects them or the job adds one, with some exceptions, so mention your switchboard's age. Call 0401 456 987 for availability or request a free quote.

Licence REC 135414.7 from 12 Google reviews

Get a free quote

Tell Tom about the job and he will call you back with a written price.

Free written quote. No call centre, Tom calls you back.

About light switches & power points

The work on this page falls into three kinds of job: a fitting that has failed or been damaged, an old switch or power point you want swapped for a modern one, or a room that needs more outlets or a switch in a more sensible spot. All three involve the fixed wiring behind the wall plate, which is why Queensland law treats them as electrical work rather than a household repair. Extra double points, USB power points and moved switches are among the things people search for with this service; ask about them when you request a quote and Tom can confirm which fittings he can supply for your room.

Why Tom's Air Conditioning & Electrical for light switches & power points

The law draws its line at the wall plate. Under the Electrical Safety Act 2002, installing, replacing, repairing or altering electrical equipment is electrical work, and only someone holding an electrical work licence that covers it may do it, while a business doing that work needs an electrical contractor licence. The Queensland Government puts it plainly: electrical work is never a do-it-yourself job, and the Electrical Safety Office lists installing a light switch or power point among the jobs that call for a licensed electrician. That applies to a handyman as much as to a homeowner, so a quick swap by someone without the right licence is still unlicensed work.

The less obvious part is what happens once a licensed electrician opens up a power point in a home. Under the Electrical Safety Regulation 2026, a licensed electrician or contractor must not do electrical installation work in a domestic residence unless a safety switch already protects the general purpose power points, or the job includes installing one, with some exceptions. Where a safety switch already protects the power points, that requirement is already met. In an older home where the power circuits have no safety switch, it can add a switchboard item to what began as a single power point, so it belongs in the conversation before the quote, not after it.

The same check matters to people buying or leasing out a home. A new owner must have a safety switch fitted for the power points within 90 days of possession, and a landlord within 90 days of a new tenancy starting where there is none. If you are adding or replacing points in a property you have just bought or are about to rent out, both jobs can be looked at on one visit, and the full safety switch detail sits on the switchboard upgrades page.

Beyond the safety switch, the quote depends on how many points or switches are involved, whether each is a straight replacement or a new point that needs cable run to it, and how easy the wall cavity and ceiling space are to reach. Quotes are free and the business says its pricing is upfront, so you see those factors before work starts. Afterwards, a licensed electrician must make sure the affected part of the installation complies with the wiring rules, AS/NZS 3000, and a contractor who connects an installation after electrical work must give the customer a certificate of testing and compliance. Ask Tom what paperwork comes with your particular job, which landlords and sellers often keep on file.

Get a free quote

Light Switches & Power Points: what to know

Brown or scorch marks around a power point

Queensland's Electrical Safety Office guidance links discolouration on electrical fittings to overheating or moisture.

A marked point is a sign something behind the plate is not right, and the regulator's advice is to stop using equipment that faults rather than keep plugging in.

Tom replaces discoloured and damaged power points with new fittings, and as a licensed electrician he must make sure the affected part of the installation complies with the wiring rules.

A light switch that buzzes, sparks or feels warm

These are among the warning signs Tom's own page lists for old and worn light switches.

Heat and noise from a switch are not normal in use, and the regulator's guidance is not to ignore a tingle or shock from electrical equipment.

Tom replaces worn and damaged light switches with new fittings, and the law requires a licensed electrician to leave the affected wiring compliant with AS/NZS 3000.

Wall plates that move when pressed

A wall plate that shifts when pressed, or a cracked cover, is among the warning signs Tom's page lists for loose and damaged power points and switches.

The regulator's advice is to stop using electrical equipment that faults, so a moving or cracked fitting is one to have replaced rather than put up with.

Tom secures or replaces the mounting and fits a new switch or power point, which is the repair-by-replacement work his page covers.

Not enough power points where you need them

Not every request is a repair: people searching for this service also look to add extra double points or USB points, or to move a switch to a better spot.

Adding a point means running new cable from an existing circuit, which is licensed work and affects what the job costs.

Tom installs new power points and switches and explains on the free quote which fittings he can supply and how the cable will be run to each one.

Power circuits with no safety switch

Not every older home has a safety switch on its power point circuits, which is why the law sets deadlines for new owners and landlords to have one fitted.

Under the Electrical Safety Regulation 2026, a licensed electrician must not do installation work in a home unless the general purpose power points are protected by a safety switch or the job includes installing one, with some exceptions.

Tom has to meet this requirement as a licensed electrician, so mention roughly how old your switchboard is when you request a free quote and the safety switch question can be raised from the start.

A DIY or handyman swap that has gone wrong

A like-for-like swap can look simple, but replacing a fixed switch or power point is electrical work that needs a licence in Queensland.

Unlicensed work is an offence under the Electrical Safety Act 2002, and the work will not have been tested to the wiring rules by a licensed electrician.

Tom replaces the fitting, checks the connections it was wired to, and tests his own work to the wiring rules as a licensed electrician must.

The jobs Tom does most

01

Power point replacement

Replacement of loose, cracked, discoloured or damaged power points with new fittings.

A browned or scorched point should come out of use straight away; Tom replaces it with a new fitting and must leave the affected work compliant with AS/NZS 3000.

Request a free quote

02

Light switch replacement

Replacement of worn, buzzing or damaged light switches.

Even an identical swap is licensed electrical work in Queensland, which the Electrical Safety Office names specifically for light switches.

Request a free quote

03

New and extra power points

Installation of additional power points where a room needs more outlets.

If you are after extra double points or USB points, ask when you request a quote and Tom will confirm which fittings he can supply for your room.

Request a free quote

04

New and relocated switches

Installation of new light switches or moving a switch to a more practical position.

Moving a switch means new cable in the wall cavity, so access to the wall and ceiling is one of the main things that shapes the quote.

Request a free quote

05

Switch and power point upgrades

Upgrading old switches and power points to modern fittings.

In an older home, the law can require a safety switch for the power circuits before power point work goes ahead, with some exceptions, so mention your switchboard's age when you ask for a quote.

Request a free quote

A licence number you can look up

Tom's Air Conditioning & Electrical publishes Queensland electrical contractor licence REC 13541, and you can check the name and status yourself on the Queensland electrical licence search before booking. That is the licence that matters here, because the Electrical Safety Act 2002 requires the person installing or replacing a fixed switch or power point to hold an electrical work licence, and a business doing that work to hold an electrical contractor licence. The business's about page describes Tom as a licensed electrician and air conditioning technician with over 15 years of hands-on experience. He works from a single base at 10 Jacksonia Drive, Warner, and covers Bray Park, Strathpine, Lawnton, Brendale, Petrie, Joyner, Cashmere, Eatons Hill, Albany Creek and the wider northside. Quotes are free, and the business says its pricing is upfront with no hidden fees. Google reviewers, writing about air conditioning work rather than switches or power points, describe Tom as on time, quick to find the problem, knowledgeable and transparent about pricing.

  • Queensland Electrical Contractor

    Registered electrical contractor in Queensland, licence REC 13541, listed on the Electrical Safety Office licence search.

    Check the licence
  • Smoke alarm compliance

    Smoke alarm installs to the Queensland legislation: photoelectric, interconnected, and to AS 3786.

    Read the Queensland rules

Light Switches & Power Points questions

Something not covered? Call Tom on 0401 456 987.

Is it legal to change a power point or light switch myself in Queensland?

No. Installing or replacing a fixed power point or light switch is electrical work under the Electrical Safety Act 2002, and it may only be done by someone whose electrical licence covers it. The Queensland Government says electrical work is never a do-it-yourself job, and that includes a handyman without the right licence. That covers a like-for-like swap of a switch or power point as much as a new one, because replacing electrical equipment is electrical work under the Act.

My power point has gone brown and feels warm. Can I keep using it?

It is safer not to. The Electrical Safety Office's guidance links discolouration to overheating or moisture, and its advice is to stop using equipment that faults and not to ignore a tingle or shock. Leave it out of use and call 0401 456 987 for availability. Tom replaces discoloured and damaged power points with new fittings, and the law requires him to leave the affected part of the installation compliant with the wiring rules, AS/NZS 3000.

Why might adding a power point mean I need a safety switch?

Under the Electrical Safety Regulation 2026, a licensed electrician must not do installation work in a home unless the general purpose power points are already protected by a safety switch, or the job includes installing one, with some exceptions. In older homes without that protection, the safety switch becomes part of the job. Mention roughly how old your switchboard is when you request a free quote, so the safety switch question is covered before the work is booked.

What affects the cost of installing a power point?

The main factors are how many points you need, whether each is a replacement in the same spot or a new point that needs cable run to it, how easy the wall cavity and ceiling space are to reach, and whether a safety switch has to go in. Quotes are free and the business says its pricing is upfront with no hidden fees, so you see the full job before you agree to it.

Can you add USB power points or move a light switch?

Adding new power points and switches is part of the work Tom does, and USB points, extra double points and moved switches are all things you can ask about. Which USB or other fittings he can supply depends on the product, so ask him on the quote and he will confirm what suits your room. Moving a switch involves new cable in the wall, which affects the price.

I'm a landlord with worn power points in a rental. What should I keep in mind?

Loose, cracked or discoloured power points and worn light switches are replacement work Tom does for landlords as well as homeowners. A licensed electrician must leave the affected work compliant with the wiring rules, AS/NZS 3000, so ask what testing paperwork comes with the job and keep it with the tenancy records. If the power point circuits have no safety switch, a deadline applies once a new tenancy starts, which the switchboard upgrades page explains.

Do I get any paperwork for switch and power point work?

A licensed electrician must make sure the work complies with the wiring rules, AS/NZS 3000, and a contractor who connects an installation after electrical work must give the customer a certificate of testing and compliance. How that applies to a small swap depends on the job, so ask Tom what you will receive when you book. Landlords and sellers often keep this paperwork with the property records.

Get a quote for light switches & power points

Tell Tom about the job and he will call you back with a written price.

Sources

Need light switches & power points?

If a power point or switch is warm, scorched, buzzing or loose, stop using it and get it looked at. Call Tom on 0401 456 987 for availability, or use the form below for a free quote. Tell him how many points or switches are involved, whether each is a replacement or a new point, and roughly how old the switchboard is, so the quote reflects the real job, including any safety switch the work needs.

Call Tom on 0401 456 987