Skip to content
Panasonic split system indoor unit on a white wall in Gordon Park

Split system air conditioning installation

Split systems sized to the room and installed by Tom, a licensed electrician based in Warner, with the circuit and isolator wired on the same visit.

Licence REC 135414.7 from 12 Google reviews

Get a free quote

Tell Tom about the job and he will call you back with a written price.

Free written quote. No call centre, Tom calls you back.

What a split system install involves

A split system has two parts: the indoor unit on the wall of the room and the outdoor unit outside, joined by refrigerant pipes, a drain line and cabling. Installing one means mounting both units, running and sealing the pipes, connecting the drain, and wiring the system to its own circuit and isolator.

Tom handles all of it. He sizes the unit to the room, chooses the indoor position for even airflow, finds the outdoor spot with the shortest practical pipe run, and wires the new circuit from your switchboard. Before he leaves he runs the system, checks the drain and shows you the remote.

Most of his installs are for homeowners and landlords in Pine Rivers who want a bedroom or living area cooled before summer, and for small businesses that need an office or shop kept comfortable.

Compact split system outdoor unit on a townhouse balcony in Richlands
Balcony install, Richlands

Before you choose a split system

Size, brand, where the outdoor unit goes and the wiring: the four things that decide how well the system runs.

What size split system do you need?

Size comes down to the room's floor area, ceiling height and how much sun it takes. A bedroom of 10 to 15 square metres usually suits 2.0 to 2.5 kW, a 20 square metre room 2.5 to 3.5 kW, and an open living area of 35 square metres or more 5.0 to 7.1 kW. Use the guide below for a starting range, then Tom confirms the size on site.

How big is the room?
Anything that makes it warmer?

Rough cooling capacity2.5 to 3.5 kW

A guide, not a quote. Tom checks the room, the insulation and where the outdoor unit can go before he recommends a size.

Choosing a brand and model

Tom installs brands including Mitsubishi Electric, Panasonic and Rinnai. All of them make reliable inverter split systems; the differences are in quietness, Wi-Fi control, warranty and price. The rating plate on the outdoor unit, like the 2.5 kW Mitsubishi Electric unit pictured, shows the cooling and heating capacity so you can compare like with like.

Rating plate on a Mitsubishi Electric 2.5 kW R32 outdoor unit showing its cooling and heating capacity
2.5 kW unit rating plate

Where the outdoor unit goes

The outdoor unit needs clear air on all sides that matter, a solid wall bracket or ground pad, and a short pipe run to the indoor unit. Side paths, balconies and under eaves all work. Tom keeps the unit away from bedroom windows so the fan noise does not carry, and plans where the condensate drain runs so it does not puddle on paths.

Rinnai split system outdoor unit with its pipe run against a painted wall in Oxley
Outdoor unit, Oxley

The electrical side of the install

A split system needs its own circuit from the switchboard and an isolator switch beside the outdoor unit. Older switchboards sometimes need a spare circuit breaker or safety switch added first. Because Tom is a licensed electrician, the circuit, isolator and any switchboard work are done on the same visit by the same person, and tested before he leaves.

Mitsubishi Electric split system outdoor unit with its wall-mounted isolator on a face brick wall in Warner
Outdoor unit and isolator, Warner

A licence number you can look up

Every job is done under Tom's Queensland electrical contractor licence. The number is on every page so you can check it with the Electrical Safety Office before you book.

  • Queensland Electrical Contractor

    Registered electrical contractor in Queensland, licence REC 13541, listed on the Electrical Safety Office licence search.

    Check the licence
  • Smoke alarm compliance

    Smoke alarm installs to the Queensland legislation: photoelectric, interconnected, and to AS 3786.

    Read the Queensland rules

What customers say

Tom and his colleague recently came out to fix my one-room aircon that had stopped blowing air, and the whole experience was outstanding. They arrived right on time, quickly identified the problem, and had everything running perfectly in no time. Both were friendly, professional, and clearly very skilled. Plus, the service was very affordable, which was a huge relief.

Raj JanorkarAir conditioning repair

Read the reviews on Google

Split system questions

Something not covered? Call Tom on 0401 456 987.

How long does a split system install take?

A single back-to-back split system, where the outdoor unit sits straight behind the indoor wall, usually takes half a day to a day. Longer pipe runs, a second storey or a new circuit from a full switchboard add time. Tom tells you how long your install will take when he quotes, so you know whether to plan for a morning or the whole day.

Do I need a new circuit for my air conditioner?

Most split systems need their own circuit from the switchboard and an isolator beside the outdoor unit, so the unit can be switched off safely for servicing. Small units can sometimes share a circuit, but Tom checks the load first. As a licensed electrician he wires the circuit on the same visit as the install, so you do not need a second tradie.

Which brands of split system do you install?

Tom installs brands including Mitsubishi Electric, Panasonic and Rinnai, which you can see in his job photos, and can quote on the brand and model you have in mind. If you are not sure, he will suggest a unit that suits the room size, your budget and how often you plan to run it.

Where should the outdoor unit go?

The outdoor unit needs clear air around it, a solid base or wall bracket, and the shortest practical pipe run to the indoor unit. Side paths, under eaves and balconies all work if the airflow is not blocked. Tom also keeps it away from bedroom windows where the fan noise would carry, and checks where the condensate water will drain.

Should I get a split system or ducted air conditioning?

Split systems suit homes that want to cool or heat a few rooms, cost less to install and let you run only the rooms in use. Ducted systems cool the whole house from one unit and suit larger new builds with roof space. Most homes Tom works in across Pine Rivers choose one or two split systems for the bedrooms and living area.

Get a split system quote

Add the room size or the sizing guide's result and Tom will come back with a written price.

Need a split system installed in Pine Rivers?

Call Tom for a free written quote, or use the sizing guide and send the details.

Call Tom on 0401 456 987