The Electrical Safety Act places the duty squarely on the person running the business: a shop, cafe, salon or office must be conducted in a way that is electrically safe, and every item of electrical equipment used in it must be electrically safe too. The Electrical Safety Regulation 2026 adds a duty to manage electrical risks at the workplace, including risks from how the installation and equipment are maintained and tested. In practice, a frayed kettle cord in the staff room or a power board sitting beside a wash-down sink is the owner's problem to fix, not something to leave for the landlord or the supplier.
For office and service work, such as selling goods from a shop, cooking in a restaurant or running a hairdressing salon, the regulation gives you a choice for plug-in equipment that is moved during normal use, along with extension cords and power boards. Either that equipment is inspected and tested by a competent person, at least every 5 years if it is used only for office work and at least every year otherwise, or it is connected to a safety switch. Fitting safety switches to the socket circuits is a one-off job, but it brings its own duty: each fixed safety switch must be tested immediately after it is connected and then at the intervals set in AS/NZS 3760. Tom can install those safety switches, test them on connection and explain the ongoing schedule for your premises.
Test and tag itself does not legally require an electrician; a competent person with the right training, test instruments and knowledge of AS/NZS 3760 can do it. The case for a licensed electrician is what happens when an item fails. A failed item must be tagged as unsafe and withdrawn from use immediately, and testing that involves dismantling equipment should only be done by a licensed electrical worker. A licensed electrician may also do the dismantling and repair work on failed equipment that a non-licensed tester should leave alone.
Workshops carry stricter rules. Where manufacturing work such as vehicle repair or welding is the main activity, socket-outlets up to 20A within 2.3m of the floor need a fixed safety switch, and plug-in equipment must be tested every 6 or 12 months depending on whether it is double insulated. Tenants who do not control the installation should raise it with the landlord early. Tom works from a single base in Warner and serves the Pine Rivers suburbs, Brendale and Strathpine among them.