Skip to content
Gold multi-ring LED pendant hanging in a double-height void above a lounge room in Pimpama

Domestic electrician for North Brisbane and Pine Rivers homes

A licensed domestic electrician based in Warner for owner-occupiers and landlords across Pine Rivers and North Brisbane.

Owning a home in North Brisbane or the Pine Rivers district brings a run of electrical jobs over the years, and some of them come with legal deadlines attached. Buyers have 90 days after the possession day to have a safety switch protecting the power points, landlords face a similar duty when a tenancy starts, and even a single new power point can hinge on that switch being in place first. Tom's Air Conditioning & Electrical, based in Warner, handles lighting, power points and switches, switchboard upgrades, fault finding, smoke alarms and split systems for households. Call 0401 456 987 for availability or request a free quote.

Licence REC 135414.7 from 12 Google reviews

Get a free quote

Tell Tom about the job and he will call you back with a written price.

Free written quote. No call centre, Tom calls you back.

About domestic electrical

Buying a home, renting one out, adding to it and repairing it each bring electrical jobs, and Queensland law reserves the wiring and fittings work for a licence holder. Across the City of Moreton Bay, 81.1% of occupied homes are separate houses and 31.1% are rented, so most readers are either looking after a house over the long term or managing a rental with tenancy duties. From the safety switch to new lighting and smoke alarms, one licensed electrician based in Warner can handle each of those stages.

Why Tom's Air Conditioning & Electrical for domestic services

Under the Electrical Safety Regulation 2026, safety switch duties attach to three household events: buying a home, renting one out and adding new electrical work to it. In short, a buyer whose settlement notice says no approved safety switch protects the power points has 90 days after the possession day to have one installed, and a landlord has a similar duty tied to the start of a tenancy. The detail of each rule, and the switchboard work that usually answers it, sits on the switchboard upgrades page.

Safety switches have been mandatory in newly built or extended Queensland homes since 1992, so the houses most likely to be missing one are those built earlier and never upgraded. Across the City of Moreton Bay, 81.1% of occupied homes are separate houses and 31.1% are rented, so those duties reach a large share of the region's owners and landlords.

Between those events, most household calls are about something going wrong. Tom's own troubleshooting guide draws a practical line: a homeowner can check the board for a tripped breaker, but a burning smell, a hot fitting, lights flickering across several circuits or a breaker that trips again straight after reset are signs to stop and call a licensed electrician. His Domestic Services page adds cracked or discoloured power points, flickering switches and buzzing sockets as signs worth having checked early. Finding the cause is fault finding, and repairing what is found is licensed work.

Storms are the unplanned milestone. If Energex disconnects a damaged property, the owner, body corporate or landlord has to book a licensed electrical contractor to inspect it, and that contractor signs off the Electricity Defect Report or leaves a Certificate of Test and Compliance before power is reconnected. In a townhouse or unit complex the body corporate may make that booking, so check first.

Tom publishes Queensland electrical contractor licence REC 13541, which you can check on the Electrical Safety Office licence search, and he works from a base in Warner serving Bray Park, Strathpine, Lawnton, Petrie, Albany Creek and nearby suburbs. The safety switch, fault finding, lighting, smoke alarms and split system wiring can therefore stay with the same licensed electrician as the house changes hands, gains tenants or grows.

Get a free quote

Domestic Electrical: what to know

A new power point, light or split system quoted on an older switchboard

Under section 30 of the Electrical Safety Regulation 2026, a licensed electrician must not do installation work in a home without an approved safety switch on the power points unless the job includes fitting one or a narrow exception applies.

A small job can grow to include a safety switch, which is a surprise if nobody mentions it before the quote.

Before the job is priced, ask Tom to confirm whether a safety switch has to come first, so he can explain the requirement before any work starts. Tom's own power point guide says he looks at whether the switchboard can take extra circuits and how the cable will run before quoting, then tests polarity, earth continuity, insulation resistance and the safety switch once the outlet is in. Where the work is connected to supply, the law requires the contractor to give you a certificate recording the test date and the contractor licence number.

Mitsubishi Electric split system outdoor unit with its wall-mounted isolator on a face brick wall in Warner
Air conditioner circuit and isolator, Warner

Cracked or discoloured power points, flickering switches or buzzing sockets

Tom's own Domestic Services page lists these as signs that there may be an underlying electrical problem worth fixing early.

These signs are reasons to get the fitting checked, not a diagnosis, and replacing or repairing a power point or switch is licensed electrical work in Queensland.

Leave the fitting closed and call Tom, who handles power points, switches and fault finding, to find the cause. Tom's site says he replaces power points that are loose, cracked or discoloured, along with worn switches.

A breaker that trips again as soon as you reset it

Tom's own troubleshooting guide says a breaker that trips again straight away points to a genuine fault that needs professional diagnosis, not another reset.

Resetting it over and over does not fix the cause, and the same guide lists recurring trips, power points or switches still dead after the board is checked, and burning smells or hot components among the signs that call for a licensed electrician.

Stop resetting it, note which part of the house lost power and what was running, and call Tom for availability to trace the fault. Tracing and repairing wiring or fittings is licensed electrical work.

A safety switch that does not trip when you press its test button

A safety switch can sit for years without anyone pressing its test button, while the Electrical Safety Office recommends testing every three months using that button.

If the switch does not cut the power to its circuit when tested, it needs attention.

Testing is a job you can do yourself; if a switch fails, or your board has no test buttons at all, call Tom to check it.

Smoke alarms that each sound on their own rather than together

Queensland's deadline for interconnected photoelectric smoke alarms in every existing home, including townhouses and units, is 1 January 2027.

Alarms that only sound one at a time fall short of the interconnected requirement every existing home faces from that date.

Tom installs smoke alarms, and his own smoke alarm guide says the electrician tests each alarm and checks interconnection by triggering one and confirming the rest sound, so ask to see that test before he leaves. The smoke alarm installation page covers the rule in detail.

Power left off after storm damage

After storm, flood or inundation damage, Energex may disconnect a property for safety and leave an Electricity Defect Report in the meter box.

Before Energex reconnects, the owner, body corporate or landlord has to book a licensed electrical contractor to check the property, fix any defects and either sign the report or leave a Certificate of Test and Compliance.

Call Tom for availability and ask whether he can take the safety check and complete the paperwork for your property.

The jobs Tom does most

01

Switchboard upgrades and safety switches

Switchboard upgrades for homes, including safety switch protection for power point circuits.

For buyers handed a settlement notice and landlords readying a rental, this is usually the first job on the list.

See switchboard upgrades

02

Power points and light switches

Repair, replacement and installation of power points and switches.

Cracked, discoloured or buzzing fittings are a reason to call rather than open them, since replacing a power point or switch is licensed work.

See power points and switches

03

Lighting and LED downlights

Indoor lighting and LED downlight installation for homes.

Under section 30, a new light circuit in a home without power point safety switches may need that switch fitted first.

See lighting services

04

Fault finding

Tracing faults such as tripping safety switches and dead circuits.

A safety switch that keeps tripping, or a circuit that has gone dead, is worth a licensed check.

Request a free quote

05

Smoke alarm installation

Interconnected photoelectric smoke alarms for homes and rentals.

By 1 January 2027, existing Queensland homes must have interconnected photoelectric alarms, so it is worth booking alongside other household work.

See smoke alarm installation

06

Home air conditioning

Split system installation, servicing and repairs for homes.

Because Tom is also an air conditioning technician, the circuit and the split system can be handled by one tradesperson.

See home air conditioning

A licence number you can look up

Tom's Air Conditioning & Electrical publishes Queensland electrical contractor licence REC 13541, and you can check the name and status on the Electrical Safety Office licence search before booking. That number matters for household jobs, because in Queensland anything beyond simple tasks such as changing a globe or a fuse, including installing, repairing or altering wiring and fittings, must be done by a licence holder. According to the business's About page, Tom is a licensed electrician who also works on air conditioning, with more than 15 years in the trade across residential, commercial and light commercial projects. One of his job photos from Warner shows a Mitsubishi Electric split system outdoor unit he installed on a face brick wall, with its wall-mounted isolator beside it. Recent work listed on Tom's site includes pendant lighting, ceiling fans and switchboard upgrades, and a job photo shows a gold multi-ring LED pendant he hung in the double-height stair void of a Pimpama home, outside his listed service area. He works from one base at 10 Jacksonia Drive, Warner, and quotes are free.

  • Queensland Electrical Contractor

    Registered electrical contractor in Queensland, licence REC 13541, listed on the Electrical Safety Office licence search.

    Check the licence
  • Smoke alarm compliance

    Smoke alarm installs to the Queensland legislation: photoelectric, interconnected, and to AS 3786.

    Read the Queensland rules

Domestic Electrical questions

Something not covered? Call Tom on 0401 456 987.

What should I do with the seller's safety switch notice at settlement?

Start by writing down the possession day, because your 90 days to have an approved safety switch on the power points count from that day. If the notice says one is already installed, section 28 asks nothing more of you on that point, though pressing its test button confirms it cuts the power. If it says none is fitted, ask Tom to quote early in the window. Then file the notice with your property paperwork.

My home was built after 1992. Should it already have safety switches?

It should. Queensland has required safety switches in every newly built or extended home since 1992. The build year is a useful guide but not a guarantee for your particular house. If you bought it recently, the seller's settlement notice already answers the question for the power points; if you have owned it for years, or no notice exists, ask Tom to look at the switchboard and confirm what is fitted.

I own a townhouse. Who arranges the electrical safety check after storm damage?

It can be you or the body corporate. Once Energex has disconnected a damaged property, booking a licensed electrical contractor for the safety check falls to whoever is responsible for it: you, a building manager, the body corporate or a landlord. Townhouses and similar dwellings account for 13.3% of Moreton Bay's occupied homes, and flats or apartments for 4.7%. Ask your body corporate whether it is booking the check before you call Tom for availability.

After settlement, what electrical checks can I do myself?

Reading the paperwork and testing the safety switch are yours; changing the wiring is not. The seller's written notice tells you whether an approved safety switch protects the power points, and the Electrical Safety Office recommends pressing each switch's test button every three months. You can also plug equipment in and replace a light globe or a fuse. Adding or altering anything in the switchboard, wiring or fittings is work for a licence holder.

Which suburbs does Tom cover for household electrical work?

Homes across Pine Rivers and North Brisbane. Tom works from one base at 10 Jacksonia Drive, Warner, and serves Bray Park, Strathpine, Lawnton, Brendale, Petrie, Joyner, Cashmere, Eatons Hill, Albany Creek and the wider North Brisbane area. He is usually out on jobs, so call 0401 456 987 for availability, or request a free quote online.

After a storm, do I have to wait for Energex before booking an electrician?

Not always. Energex says that if you know your fittings or wiring were damaged, flooded or inundated, you do not need to wait for an Electricity Defect Report before arranging a check by a licensed electrical contractor. Where Energex has disconnected the property, the contractor's sign-off still has to be in place before the power comes back on. Call Tom for availability and ask whether he can take the job.

Can one person do the wiring and the split system install?

Yes. Tom is a licensed electrician and also an air conditioning technician, and his services cover split system installation alongside household electrical work. The supply to a split system is fixed wiring, which in Queensland must be done by a licence holder. A job photo from Warner shows one of his split system installs, with a wall-mounted isolator beside the outdoor unit. Mention the split system when you book other electrical work.

Get a quote for domestic electrical

Tell Tom about the job and he will call you back with a written price.

Sources

Need domestic services?

If you have just settled on a home, are getting a property ready for tenants, or are planning a new power point, light or split system, start with the safety switch question so the timing and the quote are clear. Call Tom on 0401 456 987 for availability, or use the form below for a free quote. Tell him the suburb, roughly when the home was built, whether it is rented, and what you want added or fixed.

Call Tom on 0401 456 987