Skip to content

How to safely troubleshoot common electrical issues in your home

Some electrical problems have a simple cause you can safely find yourself. Others are warning signs that need a licensed electrician straight away. This guide covers the safe checks in order, and where to stop.

Licence REC 135414.7 from 12 Google reviews

Safe checks, in order

First, check whether it is just your home

If the whole house loses power, look outside. If the neighbours are also without power, it is most likely a supply outage. Check the Energex outage map or contact your electricity retailer, and leave your switchboard alone.

If only your home is off, or only part of it, the problem is on your side of the meter, and the switchboard is the next place to look.

Check the switchboard safely

Open the switchboard door with dry hands, standing on a dry surface, and look for a circuit breaker or safety switch that has dropped to the off position. Safety switches, also called RCDs, have a test button; circuit breakers do not. Never remove the panel inside the door.

Before resetting, turn off or unplug the appliances on the affected circuit. Then switch the tripped device fully off and back on, once. If it holds, plug appliances back in one at a time. If it trips when a particular appliance goes back in, that appliance is the likely fault: leave it unplugged and have it checked or replaced.

If it trips again straight away with everything unplugged, do not keep resetting it. That points to a fault in the wiring, a fitting or an outdoor point, and it needs an electrician.

Common problems and what they usually mean

A safety switch that trips after rain often means water has got into an outdoor power point, light or garden fitting. A safety switch that trips when one appliance starts, such as a kettle or washing machine, usually points to that appliance.

Lights that flicker in one room can be a loose globe or a failing LED driver. Lights that flicker or dim across the whole house, especially when a large appliance starts, can mean a loose connection or a supply problem and need an electrician. A power point or switch that still does not work after the switchboard checks out may have a loose connection behind the plate. Do not unscrew the plate to look: loose connections are a common cause of heat and fire.

What you can safely do yourself

In Queensland a homeowner can reset circuit breakers and safety switches, change a light globe once the light is switched off and cool, unplug and swap appliances to find a faulty one, and press the test button on each safety switch. Testing safety switches every three months is a good habit; the switch should trip straight away.

Anything beyond that, including removing switch or power point plates, opening a light fitting or touching the wiring, is electrical work. In Queensland only a licensed electrician may do it, and unlicensed repairs are a common cause of shocks and house fires.

Warning signs: stop and call an electrician

If it is safe to reach the switchboard, turn off the affected circuit and call a licensed electrician when you notice a burning smell, smoke or scorch marks at a power point, switch, light or the switchboard; buzzing or crackling from a fitting or the switchboard; a power point, switch or cord that feels warm; or a safety switch or circuit breaker that keeps tripping.

If you feel a tingle or a shock from a tap, shower or appliance, stop using it and call Energex straight away, as it can mean a fault on the supply side. If there are flames or anyone is hurt, call 000 first. Never use water on an electrical fire.

How Tom finds the fault

Tom starts with what you have noticed, so write down when the problem happens, which rooms or circuits are affected and what was running at the time. He then tests the circuits with insulation resistance and earth testing equipment to find faults that cannot be seen, repairs them, and retests before he leaves.

If the cause is an old switchboard without enough safety switches, he explains the options and quotes in writing before doing any further work.

Common questions

Something not covered? Call Tom on 0401 456 987.

Why does my safety switch keep tripping?

Most often it is an appliance with a fault, or water that has got into an outdoor power point or light after rain. Turn everything on that circuit off, reset the switch once, then turn items back on one by one; the one that trips it is the likely fault. If it trips with everything off, the fault is in the fixed wiring and needs a licensed electrician to find it.

Is it safe to keep resetting a circuit breaker?

No. Resetting a tripped breaker once, after unplugging the appliances on that circuit, is fine. If it trips again straight away, or keeps tripping over the following days, the breaker is doing its job and something on the circuit is faulty or overloaded. Repeated resets can let wiring overheat. Leave it off and have a licensed electrician test the circuit.

Want Tom to take a look?

Call 0401 456 987 or send the details for a free written quote.

Call Tom on 0401 456 987