A bedroom unit in Ferny Hills does most of its work at night, and that changes how it should be chosen and placed.
Start with size. The Energy Rating guidance is to size from the room itself: floor area, walls, insulation, windows and climate. An undersized unit runs flat out and may never hold the temperature, while an oversized one costs more to buy and to run. In a three-bedroom house, the most common size here at 54.2% of dwellings, the children's rooms are usually smaller than the main bedroom, so each one gets its own assessment rather than one capacity for every room.
Then the noise. Queensland's default noise standard limits air conditioning equipment to 3 dB(A) above background between 10pm and 7am, measured at a building where the noise can be heard, and 5 dB(A) during the day. City of Moreton Bay applies those limits when it investigates complaints. With 95.0% of Ferny Hills dwellings being separate houses, the outdoor unit usually sits along a side boundary, facing the neighbour's house. The Zoned Energy Rating Label shows indoor and outdoor noise in dB(A), so it is worth comparing both figures, the indoor one for the child sleeping under it and the outdoor one for next door.
Finally the wiring. Ferny Hills began as the Ferny Grove estate in the 1960s, and many original houses are likely to pre-date the switchboards and safety switches modern installs expect. A licensed electrician generally cannot add new installation work, such as an air conditioner circuit, where the power points have no approved safety switch, unless the job includes fitting one. Adding one circuit brings safety switch protection to that circuit; a new board brings it to every applicable circuit.
Tom's pages say the business can remove an old unit, upgrade circuits or the switchboard where needed and install the new system, so the board question and the bedroom units are answered in one visit. After connection, the law requires a certificate of testing and compliance for the electrical work.