Skip to content
Close view of a Mitsubishi Electric split system indoor unit mounted high on a wall in Warner

Air conditioning installation in Warner

Split systems for Warner family homes, rentals and small businesses, with the circuit, isolator and unit handled by one business.

Your Warner split system install starts with a site assessment in the rooms you actually want cooled, and from Tom's only base on Jacksonia Drive, Warner, that visit is a short local trip. Sizing each room on the spot matters, because a unit that is too small works harder and may not hold temperature, while one that is too big costs more to buy and run. Most Warner dwellings counted in 2021 had four or more bedrooms, so the bedrooms are likely to be where planning begins. Tom's pages describe the business as wiring the circuit and installing the unit itself, so both sit on one booking. Homeowners, landlords and small business owners can request a free quote below.

Licence REC 135414.7 from 12 Google reviews

Get a free quote

Tell Tom about the job and he will call you back with a written price.

Free written quote. No call centre, Tom calls you back.

Air Conditioning Installation in Warner

A median age of 33 at the 2021 Census made Warner a young suburb against the Queensland median of 38, and 53.6% of its families were couples with children. For households like these, cooler bedrooms on summer nights are a likely first request, with the main living area close behind. Brisbane's mean maximum sits around 30 degrees from December to February, January afternoons average about 57% humidity, and July nights drop to a mean minimum near 10.6 degrees, which is why a reverse-cycle split, heating as well as cooling, suits the year here. Those figures come from the Brisbane city weather station rather than a Warner gauge.

Rating plate on a Mitsubishi Electric 2.5 kW R32 outdoor unit showing its cooling and heating capacity
2.5 kW unit rating plate
Mitsubishi Electric indoor unit fitted high above a television in Caboolture
Indoor unit, Caboolture

Why air conditioning installation matters in Warner

Picture a Warner house with a main bedroom, two or three children's rooms and an open living area off the kitchen. That layout is common here: of the 4,288 private dwellings counted in 2021, 91.3% were separate houses and 74.0% had four or more bedrooms, almost double the Queensland share of 38.8%. With households averaging three people, many of those homes are likely to have more bedrooms than sleepers, so cooling only the rooms in use, with their doors closed, is the approach the Queensland Government recommends.

That makes sizing a room-level job. Energy Rating guidance starts from the room itself, looking at floor area, wall material, insulation, windows and climate. A west-facing main bedroom and a small child's room in the same Warner house can need quite different capacities, which is why Tom's described process puts a site assessment and sizing ahead of choosing any unit. Once the size is settled, the Zoned Energy Rating Label is the place to compare star ratings, annual kWh and indoor and outdoor noise.

Running cost deserves the same attention, since heating and cooling can account for 20% to 50% of household energy use depending on climate zone. Brisbane is shown in the label's hot zone, so the hot-zone figures are probably the ones a Warner buyer should read, though the zone for postcode 4500 is worth confirming on energyrating.gov.au. Multiplying the label's annual kWh by the tariff on your power bill gives a yearly estimate, and each degree set below 24 to 26 degrees can add about 5% to 10% to electricity use.

The electrical side is where having one business on the job helps. Adding a circuit is electrical installation work, and a Queensland home generally cannot have that work done unless a safety switch protects the power point circuits or the job includes fitting one, subject to limited exceptions, so where that protection is missing, fitting a safety switch may become part of the job and add to the quote. Separately, the Wiring Rules require RCD protection only on the altered circuit, so the new air conditioner circuit does not by itself force a switchboard replacement. Tom's pages say the business can upgrade circuits or the board where a job requires it before installing the unit, and a certificate of testing and compliance for the electrical work is due as soon as practicable after connection.

From Jacksonia Drive, homes around Warner Lakes, Banksia Park or the Pendicup Community Centre on Samsonvale Road are a short drive, so the assessment can happen in the house itself.

Get a free quote

Common air conditioning installation jobs in Warner

An outdoor unit that faces a neighbour's bedroom window

Most Warner dwellings are separate houses on neighbouring lots, so the wall that is simplest to mount a condenser on can sit opposite the house next door.

Queensland's default noise standard bars running air-conditioning equipment before 7am or after 10pm if it is more than 3 dB(A) above background, or from 7am to 10pm if more than 5 dB(A) above, measured at an affected building, and City of Moreton Bay investigates complaints about these units.

Tom's site assessment and system design cover where the unit goes, and comparing the outdoor dB(A) on the Zoned Energy Rating Label helps pick a quieter model for a spot near a bedroom or a fence.

Mitsubishi Electric split system outdoor unit with its wall-mounted isolator on a face brick wall in Warner
Outdoor unit and isolator, Warner

A condenser baking in the afternoon sun

The most convenient outside wall for the pipe run is not always a shaded one, and a family home's bedroom wing may face west.

energy.gov.au advises sheltering the outdoor unit from the afternoon sun and positioning the indoor unit for good airflow.

Placement is settled at the site assessment, before the unit is chosen, so shade and airflow are weighed alongside the pipe run and the neighbour's side of the house.

One unit size picked for every bedroom

With 74.0% of Warner homes holding four or more bedrooms, it is tempting to buy matching units for rooms that differ in size, windows and aspect.

An undersized unit works harder and may not hold temperature, and an oversized one costs more to buy and to run.

Tom's described approach is a site assessment and sizing so each unit is neither undersized nor oversized, and a reviewer has called him transparent about pricing.

A split system that came with the house

Suburban housing in Warner began in 1995 and Warner Lakes followed from 2005, so some homes may still run units fitted when they were new.

Heating and cooling can make up 20% to 50% of household energy use, and a newer unit's label kWh multiplied by your tariff shows what it would cost to run.

Tom's pages say the business replaces old, faulty or unrepairable units with newer energy-saving models, removing the old unit and upgrading circuits where required.

Power point circuits without safety switch protection

A new split needs wiring back to the switchboard, and an older board may not have every power point circuit protected.

Electrical installation work in a Queensland home generally cannot go ahead unless a safety switch protects the power point circuits or the job includes one, subject to limited exceptions.

If the power point circuits lack that protection, fitting a safety switch may need to be part of the job, which can add to the quote. That is a separate matter from the new air conditioner circuit, which gets its own RCD protection under the Wiring Rules without forcing a full board upgrade.

A townhouse exterior that needs body corporate sign-off

8.5% of Warner dwellings counted in 2021 were semi-detached, row, terrace or townhouse homes, and some of these homes may sit within a body corporate scheme.

Under the standard by-laws, changing a lot's external appearance needs the body corporate's written approval except where the change is minor and leaves the amenity of the lot unharmed, though a scheme may have its own registered by-laws.

Check your scheme's by-laws first; Tom's site assessment and system design give you the outdoor unit position and pipe route to put in a written request.

Other services in Warner

01

Split system supply and installation

Supply and installation of wall-mounted split systems for homes and light commercial spaces, sized to each room and tested on completion.

With 74.0% of Warner homes counted in 2021 holding four or more bedrooms, a quote may cover several bedrooms, each sized on its own.

Get an installation quote

02

Dedicated circuit and isolator

The electrical side of a split system install: the supply circuit, the outdoor isolator and the testing paperwork.

A Warner install does not need a second trade for the wiring, because Tom's pages describe the business handling both the circuit and the unit.

Ask about the wiring

03

Replacing an old unit

Removal of an old, faulty or unrepairable split system and installation of a newer energy-saving model.

Warner's housing dates from 1995 and Warner Lakes from 2005, so some homes may still have the split system fitted when they were built.

Get a replacement quote

04

Switchboard and safety switch check

A check of the switchboard and safety switch protection before a new air conditioner circuit goes in.

Adding a split to one Warner bedroom alters one circuit, and under the Wiring Rules only that circuit needs RCD protection, so a full board upgrade stays a separate decision.

Ask about your board

05

Rental and investment property installs

Split system installs for landlords and property managers, with the electrical compliance paperwork supplied.

About 30.3% of Warner dwellings were rented in 2021, and the certificate of testing and compliance for the new circuit belongs in the property file.

Get a rental quote

A licence number you can look up

Two checks are worth making before any installer starts drilling. energy.gov.au says anyone installing an air conditioner must hold an Australian Refrigeration Council licence, which buyers can look up. That licence is a national environmental one, while wiring the new circuit falls under separate Queensland electrical licensing. Tom's Air Conditioning & Electrical publishes electrical contractor licence REC 13541, and the Electrical Safety Office licence search will show whether it is current. Tom's about page states over 15 years of hands-on experience. On Google, Raj Janorkar wrote that Tom and a colleague arrived on time and quickly found why a one-room air conditioner had stopped blowing air; that was a repair, and he recommends Tom for both repairs and installations. Naomi Corbett called Tom very knowledgeable and transparent about pricing. Split systems from Mitsubishi Electric, Panasonic and Rinnai appear in Tom's own job photos.

  • Queensland Electrical Contractor

    Registered electrical contractor in Queensland, licence REC 13541, listed on the Electrical Safety Office licence search.

    Check the licence
  • Smoke alarm compliance

    Smoke alarm installs to the Queensland legislation: photoelectric, interconnected, and to AS 3786.

    Read the Queensland rules

Directions from Warner to our workshop

Warner is our home base. The workshop sits at 10 Jacksonia Drive, Warner QLD 4500, Australia, so jobs here get our fastest response. Call and we can often be on site the same day.

Tom's Air Conditioning & Electrical

10 Jacksonia Drive, Warner QLD 4500, Australia

0401 456 987

Questions from Warner

Something not covered? Call Tom on 0401 456 987.

Where should the outdoor unit go on a Warner house with neighbours close by?

Away from the neighbour's bedroom if you can. Queensland's default noise standard limits air conditioners to 3 dB(A) above background before 7am and after 10pm, and 5 dB(A) above from 7am to 10pm, measured at an affected building. City of Moreton Bay investigates complaints about these units. energy.gov.au also advises shading the outdoor unit from the afternoon sun. Tom's site assessment covers placement, and the label's outdoor dB(A) helps compare quieter models.

How do I size a split system for each bedroom in a four-bedroom Warner home?

Size each room separately rather than buying matching units. Energy Rating guidance starts with floor area, wall material, insulation, windows and climate, and warns that an undersized unit works harder while an oversized one costs more to buy and run. Warner homes are mostly four-bedroom houses, so rooms often differ in size and aspect. Tom's described process is a site assessment and sizing before a unit is chosen. Request a free quote to start.

Which energy rating zone should a Warner buyer read on the label?

Probably the hot zone. Brisbane is shown in the hot zone of the Zoned Energy Rating Label map, though it is worth confirming the zone for postcode 4500 on energyrating.gov.au. The label gives stars, annual cooling and heating kWh and noise for each zone, and the advice is to choose the size first and compare stars second. To estimate running cost, multiply the label's annual kWh by the tariff on your power bill.

I own a Warner townhouse. Do I need body corporate approval for a split system?

Possibly. Under the standard by-laws, a lot occupier needs the body corporate's written approval to change the lot's external appearance except where the change is minor and leaves the lot's amenity unharmed, and must not create noise likely to disturb others. Some schemes have their own registered by-laws instead, so read yours first. Townhouse-style homes made up 8.5% of Warner dwellings in 2021. Tom's site assessment gives you the unit position and pipe route for your request.

Does an installer need a refrigerant licence as well as an electrical licence?

They are two separate things. energy.gov.au says anyone installing an air conditioner must hold an Australian Refrigeration Council licence, which you can check online. That is a national environmental licence; the circuit and isolator fall under Queensland electrical licensing. A restricted Splits licence covers single-head split systems under 18 kW, while a full RAC licence covers all installation work. Tom's Air Conditioning & Electrical publishes electrical contractor licence REC 13541, which you can check on the Electrical Safety Office search.

What paperwork should a Warner landlord get after a split system install?

A certificate of testing and compliance for the electrical work. Queensland's Electrical Safety Regulation 2026 requires the licensed electrical contractor to give the customer this certificate as soon as practicable after connection, confirming the installation was tested and found safe and in line with the wiring rules. With about 30.3% of Warner dwellings rented in 2021, it is a useful record for property managers. Install time and price depend on the home and are set out in the quote.

Sources

Need air conditioning installation in Warner?

Got a list of rooms that need cooling, from the main bedroom to the kids' rooms and the lounge? Send it with a free quote request below, or ring 0401 456 987 to ask about availability. Each install starts with an assessment in those rooms, and from Jacksonia Drive that is only a short trip across Warner.

Call Tom on 0401 456 987