Skip to content
Mitsubishi Electric outdoor unit beside a water tank against a block wall in Caboolture

Air conditioning installation in Bray Park, room by room

Split systems sized for the room you want cooled first, supplied and installed by Tom, whose pages say the business can also upgrade circuits where required.

Three bedrooms, one budget: for many Bray Park households, the first split system decision is which room gets cooled first. At the 2021 Census, 96.8% of the suburb's occupied private dwellings were separate houses and 53.0% had three bedrooms, and Energy Rating says sizing should start from the room itself rather than the house as a whole. Tom's Air Conditioning & Electrical describes sizing, supply and installation as one process, and its pages say the business can also upgrade circuits or the switchboard where required, so the electrical side may sit on the same booking. Owner-occupiers, landlords, agents and small business owners can ask for a free quote covering that first room, or call 0401 456 987 for availability.

Licence REC 135414.7 from 12 Google reviews

Get a free quote

Tell Tom about the job and he will call you back with a written price.

Free written quote. No call centre, Tom calls you back.

Air Conditioning Installation in Bray Park

A mortgage, a rental or a creek-side block each shifts what the first conversation covers. At the 2021 Census, 42.8% of Bray Park's occupied private dwellings were owned with a mortgage, 27.3% were owned outright and 28.4% were rented, so landlords and property managers are likely to book a fair share of local installs on behalf of tenants. Along the southern boundary, where Four Mile Creek separates Bray Park from the suburbs below it, where the outdoor unit can safely sit may be worth settling before the brand or model. Tom works on split systems for homes and light commercial premises, from a first unit in an uncooled room to replacing an old, faulty or unrepairable unit with a newer energy-saving model.

Mitsubishi Electric split system outdoor unit with its wall-mounted isolator on a face brick wall in Warner
Outdoor unit and isolator, Warner
Panasonic split system indoor unit on a white wall in Gordon Park
Indoor unit, Gordon Park

Why air conditioning installation matters in Bray Park

Bray Park is close to a suburb of nothing but separate houses: 96.8% of its occupied private dwellings at the 2021 Census, against 74.8% across Queensland. Just over half had three bedrooms, 41.8% had four or more, and the average came to 3.4 bedrooms per dwelling. In homes of that size, cooling is likely to be planned one room at a time, with the main living area and the bedrooms used most each given a unit matched to that space.

The order of those rooms shows up on the power bill. energy.gov.au puts heating and cooling at somewhere between a fifth and a half of a home's energy use, varying by climate zone. The Queensland Government suggests cooling to between 24 C and 26 C, notes that every degree cooler can push electricity use up by roughly 5% to 10%, and advises shutting the doors, windows and blinds of the room being cooled. A wall-mounted split serving one closed room fits that advice, and a reverse-cycle unit also covers the cooler months, since energy.gov.au says these systems move heat rather than make it.

Getting each room's size right is the second half of the job. Energy Rating says the choice should rest on the room's floor area, its walls and insulation, its windows and the local climate: a unit too small for the room strains and may struggle to hold the set temperature, and one too large costs more up front and on every bill. A bedroom and an open living area in the same Bray Park house can therefore call for quite different units. Once the size is fixed, the Zoned Energy Rating Label compares models with a 1 to 10 star rating for each climate zone, annual kWh figures and indoor and outdoor noise in dB(A). Brisbane is shown in the hot zone on the label's map, so the hot-zone stars are likely to be the ones worth reading here.

As Tom's pages describe it, an install runs from a site assessment and sizing, so the unit is not undersized or oversized, through to installation and testing. Tom's pages also say the business can upgrade circuits or the switchboard where a job requires it, so the electrical work need not go to a second trade. Owners who expect to cool more rooms later are welcome to mention them at the site assessment that opens Tom's described approach.

Get a free quote

Common air conditioning installation jobs in Bray Park

Cooling the room that matters least first

With 53.0% of Bray Park's occupied private dwellings having three bedrooms at the 2021 Census, many households may stage their units one room at a time. When cooling is staged, there is a risk the first unit goes where it is easiest to fit rather than in the room used most.

The Queensland Government advises cooling only the room in use, with its doors, windows and blinds closed, so the first unit does most good in the room people spend their hot afternoons and nights in.

Tom's described approach starts with a site assessment, where an owner can rank the rooms and have the first unit sized for the one that earns it.

Mitsubishi Electric indoor unit fitted high above a television in Caboolture
Indoor unit, Caboolture

A unit picked on price or brand instead of the room

A unit chosen off a shelf or a sale price takes no account of the room's floor area, walls, insulation and windows.

Energy Rating warns that too small a unit has to work harder and can fall short of the set temperature, while too big a unit adds to both purchase and running costs.

Sizing is part of Tom's described process, so the unit is matched to the room before the brand is chosen; Mitsubishi Electric, Panasonic and Rinnai units appear in his own job photos.

An outdoor unit in a low spot near Four Mile Creek

Four Mile Creek forms Bray Park's southern boundary, and the flattest, least visible spot for a condenser is not always the highest one on the lot.

Queensland Government flood resilience guidance recommends lifting a condenser clear of the highest known flood level, or failing that as high as is practical.

Owners can pull the council's Flood Check report for their lot first; where it flags the lot as flood-affected, a raised stand or bracket can be discussed during the site assessment that opens Tom's described approach.

A condenser outside the house next door's bedroom

On a block with a separate house, the outdoor unit goes on an outside wall, and that wall can face a neighbour's window.

Outside the hours of 7am to 10pm, Queensland's default standard lets an air conditioner run no more than 3 dB(A) over the background level at an affected building, rising to 5 dB(A) during those hours, and Moreton Bay's council looks into complaints.

Placement is part of Tom's described approach, which starts with a site assessment, and the label's outdoor dB(A) rating lets an owner compare quieter models for a tight side passage.

A rental install with no record for the owner's file

With 28.4% of Bray Park's occupied private dwellings rented at the 2021 Census, many installs are likely to be booked by an owner or agent who is not living in the home.

After connection, the licensed electrical contractor owes its customer a certificate of testing and compliance, which the regulation says must be handed over as soon as practicable.

An owner or agent can request the quote without the tenant, and Tom's described approach covers the circuit as well as the unit, so one business can handle both.

An older board with no safety switch on the power points

Bray Park was named in 1970 and its schools opened from 1973, so many homes are likely to date from the 1970s on, and some boards of that age may not protect every circuit.

The Electrical Safety Regulation 2026 generally bars any electrical installation work in a home whose power point circuits lack an approved safety switch, unless the job fits one, with limited exceptions.

Because the Wiring Rules require RCD protection on the altered circuit alone, a full board change is a separate decision, and Tom's pages list circuit and switchboard upgrades, where required, as part of what he does.

Other services in Bray Park

01

Split system supply and installation

Sizing, supply and installation of wall-mounted split systems for homes and light commercial spaces.

In a three-bedroom Bray Park house, the first unit is likely to go in the room used most on hot nights, sized to that room alone.

Get an install quote

02

Dedicated circuit and isolator

A new circuit from the switchboard and an isolator beside the outdoor unit, wired by a licensed electrician.

Near Four Mile Creek, council's Flood Check report gives flood information for the lot; if it shows the lot as flood-affected, a raised unit position is worth settling before the circuit is planned.

Get a circuit quote

03

Replacing an old unit

Removal of an old, faulty or unrepairable unit and installation of a newer energy-saving model.

Swapping a unit in a Bray Park home from the 1970s on can bring the circuit or switchboard into the same job, which Tom's pages say he can handle.

Get a replacement quote

04

Switchboard and safety switch check

Circuit or switchboard upgrades where a new air conditioner needs them.

Where a Bray Park board has no safety switch on its power point circuits, the Electrical Safety Regulation 2026 will generally need one added within the job.

Electrician in Bray Park

05

Installs for rental properties

Split system installs booked by landlords and property managers for tenanted homes.

Rentals made up 28.4% of Bray Park's occupied private dwellings at the 2021 Census, so keep the new circuit's certificate of testing and compliance with the owner's property records.

Contact Tom

A licence number you can look up

Two different licences sit behind a split system install, and a Bray Park owner can check both before accepting a quote. Under energy.gov.au guidance, every air conditioner installer needs an Australian Refrigeration Council licence, and a buyer can look one up online. It is a national environmental licence for handling refrigerant; wiring the circuit is a separate, state-licensed trade. For the electrical half, Tom's site publishes Queensland electrical contractor licence REC 13541, and owners are welcome to look the number up themselves on the Electrical Safety Office's public licence search. Tom's about page gives his hands-on experience as over 15 years, as both electrician and air conditioning technician. Raj Janorkar's Google review covers a repair, not an install: a one-room aircon had stopped blowing air. He writes that Tom and a colleague arrived punctually and pinned down the problem fast. Naomi Corbett, also on Google, found Tom very knowledgeable and transparent about pricing. All Bray Park work is done from one base on Jacksonia Drive in Warner.

  • Queensland Electrical Contractor

    Registered electrical contractor in Queensland, licence REC 13541, listed on the Electrical Safety Office licence search.

    Check the licence
  • Smoke alarm compliance

    Smoke alarm installs to the Queensland legislation: photoelectric, interconnected, and to AS 3786.

    Read the Queensland rules

Directions from Bray Park to our workshop

Our workshop is at 10 Jacksonia Drive, Warner, in the Pine Rivers district. From Bray Park, near the Les Hughes Sports Complex on Francis Road, it's south along Old North Road to Kremzow Road to reach us. We keep the van stocked for the common jobs, so most Bray Park call-outs are sorted in a single visit. If it's easier to drop in, give us a call first.

Tom's Air Conditioning & Electrical

10 Jacksonia Drive, Warner QLD 4500, Australia

0401 456 987

Questions from Bray Park

Something not covered? Call Tom on 0401 456 987.

Which room should I air condition first in a three-bedroom Bray Park house?

Start with the room your household uses most in the heat, often the main living area or the bedroom that gets the afternoon sun. Just over half of Bray Park's occupied private dwellings had three bedrooms at the 2021 Census, so a staged, room-by-room plan is likely to suit many homes here. The Queensland Government advises cooling only the room in use with doors and blinds shut, which suits one unit per room. Energy Rating says each unit should be sized to its own room.

My Bray Park block is near Four Mile Creek. Where should the outdoor unit go?

Check the lot first. Council's Flood Check report gives City of Moreton Bay's latest accepted flood information for an individual property. Four Mile Creek forms Bray Park's southern boundary, so creek-side lots are worth checking. If the report marks the lot as flood-affected, Queensland's flood resilience guidance is to mount the condenser higher than the highest known flood level where possible, otherwise as high as practical, for example on a raised stand. energy.gov.au also suggests shading the unit from afternoon sun.

I own a rental in Bray Park. What paperwork comes with a new split system?

Ask for the certificate of testing and compliance. The licensed electrical contractor has to supply one as soon as practicable after connection, confirming the work has been tested and is electrically safe, and that it meets the wiring rules. With 28.4% of Bray Park's occupied private dwellings rented at the 2021 Census, owners and agents are likely to book on a tenant's behalf. Tom's described approach takes in the circuit as well as the unit, so the electrical side can sit with the same business.

What temperature should I set a split system to in a Bray Park summer?

The Queensland Government suggests 24 C to 26 C for cooling and 18 C to 20 C for heating, warning that each degree beyond those settings can raise power use by around 5% to 10%. For context, Bureau of Meteorology figures for Brisbane city show mean summer maximums of about 30 C and a July mean minimum near 10.6 C, which is why a reverse-cycle unit earns its keep in both seasons. Clean the filter twice a year to keep it running well.

Will a new air conditioner circuit mean replacing my switchboard?

Not always. The Wiring Rules ask for RCD protection only on the circuit being altered, so replacing the whole board is a separate call about its capacity and age. Separately, the Electrical Safety Regulation 2026 generally expects an approved safety switch to cover a home's power point circuits before new installation work goes ahead, or to be added within the job, subject to limited exceptions. Tom's pages say circuit or board upgrades are part of his work where a job calls for them.

How do I check an installer can legally handle the refrigerant?

Look up their Australian Refrigeration Council licence, which energy.gov.au says every air conditioner installer needs and buyers can search online. The licence type matters too: the restricted Splits licence is limited to single-head splits below 18 kW, whereas the full RAC licence extends to all air conditioning installation, service and repair work. The refrigerant licence does not cover electrical work, which needs a separate Queensland electrical licence.

How long does an install take, and what will it cost?

Both depend on the home: the room, where the outdoor unit goes, the run back to the switchboard and whether the board needs work. Tom's quotes cost nothing and list the price upfront, with no hidden fees, so the price and the scope are clear before work starts. For running costs, Energy Rating says to multiply the label's total cooling and heating kWh by the tariff on your power bill.

Sources

Need air conditioning installation in Bray Park?

Which room in your Bray Park house gets the worst of the summer heat? Name it in the quote form below, along with its rough size, the side its windows face and where you picture the outdoor unit, and list any other rooms you might cool later. Landlords and property managers can send the same details for a tenanted home. To check when Tom is free, call 0401 456 987.

Call Tom on 0401 456 987