In Joyner, the compliance question is often less about whether a home ever had the right alarms and more about when those alarms were made. The suburb counted 2,769 residents in 2011 and 2,833 in 2016, then jumped to 3,600 by 2021, so a share of its 1,219 private dwellings may come from that recent burst of building, though no build-date figures confirm how many. Homes approved from 1 January 2017 should already carry hardwired, interconnected photoelectric alarms.
That head start has an expiry date. Queensland requires each alarm to be replaced within 10 years of its manufacture date, and any new unit must itself be less than 10 years old when fitted. A set made in 2016 or 2017 for one of those builds is likely to reach its limit between about 2026 and 2027, right around the 1 January 2027 deadline that applies to every other Queensland home. Because those houses started with mains-powered alarms, every replacement has to stay hardwired, and WorkSafe Queensland says 240V alarms must be installed by a licensed electrician.
House size adds to the job. At the 2021 Census, 74.7% of occupied Joyner dwellings had four or more bedrooms and 94.7% were separate houses, with an average of 3.9 bedrooms against 3.2 for Queensland. The law wants an alarm in each bedroom and in the hallway joining the bedrooms to the rest of the storey. Worked through those rules, a single-storey four-bedroom house with the master suite in its own wing needs at least six alarms, four for the bedrooms and a hallway alarm for each bedroom area. All of them have to sound together, so replacing them as one linked system avoids a mix of ages and links.
The trigger date differs by household. Half of Joyner dwellings (50.0%) were owned with a mortgage in 2021 and 22.2% were rented. Owner-occupiers who have not upgraded work to 1 January 2027. Landlords must comply by the next new or renewed lease or 1 January 2027, whichever comes first, and sellers by the point they agree to sell or 1 January 2027, whichever comes first.
Tom's base at 10 Jacksonia Drive, Warner, is reached from Joyner by heading south along Samsonvale Road, then Old North Road and Kremzow Road. His smoke alarm guide describes walking the layout, checking the existing wiring, fitting the alarms and then setting one off to confirm the others respond. If the power point circuits lack a safety switch, one may need to go in before the alarms are wired.