Skip to content
Continuous LED batten lighting across a raked ceiling in a commercial fit-out

Electrician in Ferny Grove

Licensed electrical work for Ferny Grove houses, rentals and units from a Queensland electrical contractor, REC 13541.

Many Ferny Grove houses went up after the suburb's urbanisation in the late 1970s, which means plenty of them were likely built before safety switches became compulsory for new Queensland homes in 1992. That matters most when a house changes hands: the seller must say in writing whether one is fitted, and a new owner whose power points have none has 90 days after taking possession to fix it. Tom's Air Conditioning & Electrical holds contractor licence REC 13541 and covers switchboards, power points, lighting, split system circuits and smoke alarms. Request a free, upfront quote below, or call 0401 456 987 to check availability.

Licence REC 135414.7 from 12 Google reviews

Get a free quote

Tell Tom about the job and he will call you back with a written price.

Free written quote. No call centre, Tom calls you back.

Electrical work in Ferny Grove

Most electrical calls from Ferny Grove start with a house rather than a fault. About three in four homes here are owner-occupied, split almost evenly between owners still paying a mortgage and owners who have paid theirs off, and nearly nine in ten dwellings are separate houses. So the usual jobs are the ones an owner of an established house books: checking the switchboard after buying, adding power points, swapping old fittings for LED downlights, wiring a split system, or bringing smoke alarms up to the 2027 standard. More than one in five homes is rented, and those owners have their own safety switch rules to meet.

Why electrician matters in Ferny Grove

Ferny Grove took its name from the railway station that now ends the Ferny Grove line, and before houses arrived the land south of that station held a large claypit and the Wunderlich tile factory. Urbanisation came in the late 1970s, and Ferny Grove State High School opened in January 1980. The population kept growing into the late 1990s, so building did not stop with the first wave.

That history puts a large share of Ferny Grove houses on the early side of 1992, the year safety switches became mandatory for every newly built or extended Queensland home. A house that has been extended or had its board replaced since may already be protected; one that has not may still have power circuits with no safety switch at all. Only a look at the switchboard settles it for any one home.

The Electrical Safety Regulation 2026, in force since 1 September 2026, turns that into paperwork whenever a house sells. The seller must give the buyer written notice, on or before the possession day, of whether an approved safety switch protects the power points. If none does, the new owner must have one installed within 90 days after the possession day. Where the house is let after that, the owner must have one fitted within 90 days of the tenancy starting.

The same regulation explains a line Ferny Grove owners sometimes see on a quote. A licensed electrician must not do electrical installation work in a home whose power points have no approved safety switch unless the job includes fitting one, with exceptions such as emergency work. So adding a power point or a split system circuit to an unprotected house can bring a safety switch into the price. Owners then have a choice: altering one circuit only requires that circuit to gain RCD protection, while replacing the whole board brings protection to every applicable circuit from it.

Tom's Air Conditioning & Electrical works under contractor licence REC 13541, and after electrical work is connected the contractor must hand over a certificate of testing and compliance carrying that number. Kept with the house papers, it answers the next buyer's question before it is asked.

Get a free quote

Common jobs in Ferny Grove

A newly bought house whose power points have no safety switch

Many Ferny Grove houses were likely built after the late-1970s urbanisation but before safety switches became mandatory for new homes in 1992, and not every one has been extended or rewired since.

If the power points are unprotected, the new owner must have an approved safety switch installed within 90 days after the possession day.

Tom checks the switchboard and fits the safety switch at the board, then provides the certificate of testing and compliance with licence REC 13541 on it.

Gold multi-ring LED pendant light glowing in front of tall curtains in Pimpama
Feature pendant install

A quote for one extra power point that includes a safety switch

A licensed electrician must not do electrical installation work in a home without an approved safety switch on the power points unless the job includes installing one, subject to exceptions such as emergency work.

Owners of older Ferny Grove houses can be surprised by the extra line item unless the rule is explained up front.

Tom looks at the board before pricing, so the quote shows the safety switch, the new point and the choice between protecting one altered circuit or replacing the board.

Settlement papers that say no safety switch is fitted

Under the 2026 regulation the seller must tell the buyer in writing, on or before the possession day, whether an approved safety switch protects the power points.

A 'no' starts the buyer's 90-day clock, and a seller who fits one before listing removes the question from the sale.

Sellers and buyers can book the same job: a board check, the safety switch fitted, and a certificate of testing and compliance to hand over.

A rental with unprotected power circuits

More than one in five Ferny Grove homes is rented, and a house bought and then let out may still carry its original board.

Every power point circuit in a Queensland rental must have a safety switch, and where one is missing the owner must have it installed within 90 days after the tenancy starts.

Landlords and property managers can have Tom fit the switch before the lease begins, and check the smoke alarms on the same visit.

A safety switch that does not trip when its test button is pressed

A switch can stop working without any sign until it is tested, which is why regular testing is recommended.

The Electrical Safety Office recommends pressing the test button every three months, and opening a switchboard yourself is illegal in Queensland.

Tom traces the fault and repairs or replaces the switch as licensed work.

Dated fittings and too few outlets in an established house

A house wired for how a family lived decades ago may have fewer power points and older light fittings than a household now uses.

Power boards and extension leads are not a fix, and all electrical work must be done by a licensed contractor.

Tom adds power points, replaces switches and fits LED downlights, quoting the safety switch position at the same time.

Services in Ferny Grove

01

Safety switches and switchboard upgrades

Safety switch installation, switchboard upgrades and circuit additions.

Many Ferny Grove houses likely pre-date the 1992 safety switch rule, so this is the first check for a buyer facing the 90-day duty.

Switchboard upgrades

02

Power points and switches

Extra power points and light switch replacements for homes and businesses.

In an older Ferny Grove house with unprotected power points, a new point usually comes with a safety switch, and the quote shows both.

Get a power point quote

03

Lighting and LED downlights

New lighting points, LED downlight upgrades and switching for homes and businesses.

Established Ferny Grove houses often have older fittings worth replacing, and the work is licensed electrical work, not a DIY job.

Get a lighting quote

04

Split system circuits and installation

Dedicated circuits and split system air conditioning installation and servicing.

A new split system circuit in an unprotected house brings the safety switch rule into play, so Tom quotes the circuit, the switch and the unit together.

Air conditioning installation

05

Smoke alarm installation

Interconnected photoelectric smoke alarms to the Queensland standard.

Every Ferny Grove home needs interconnected photoelectric alarms by 1 January 2027, so a post-purchase board check can cover the alarms too.

Smoke alarm installation

06

Fault finding

Tracing tripping safety switches, dead circuits and faulty fittings.

Ferny Grove is a booked trip from the Warner base, so call to check availability for a fault.

Contact Tom

A licence number you can look up

Tom's Air Conditioning & Electrical holds Queensland electrical contractor licence REC 13541, and you can check it on the Electrical Safety Office licence search before booking. Tom has worked in the trade for over 15 years, as a licensed electrician and air conditioning technician. The business works from one base at 10 Jacksonia Drive, Warner, and travels to Ferny Grove for booked jobs. Google reviewers describe the experience: Raj Janorkar wrote that Tom and a colleague arrived right on time, quickly identified why a one-room aircon had stopped blowing air and were very affordable. Naomi Corbett described Tom as very knowledgeable and transparent about pricing. The business's stated policy is free, upfront quotes with no hidden fees.

  • Queensland Electrical Contractor

    Registered electrical contractor in Queensland, licence REC 13541, listed on the Electrical Safety Office licence search.

    Check the licence
  • Smoke alarm compliance

    Smoke alarm installs to the Queensland legislation: photoelectric, interconnected, and to AS 3786.

    Read the Queensland rules

Directions from Ferny Grove to our workshop

Our workshop is at 10 Jacksonia Drive, Warner, in the Pine Rivers district. From Ferny Grove, near Ferny Grove railway station, the end of the Ferny Grove line, it's north-east through Arana Hills on South Pine Road and Bunya Road, then Eatons Crossing Road and South Pine Road to Kremzow Road to reach us. We keep the van stocked for the common jobs, so most Ferny Grove call-outs are sorted in a single visit. If it's easier to drop in, give us a call first.

Tom's Air Conditioning & Electrical

10 Jacksonia Drive, Warner QLD 4500, Australia

0401 456 987

Questions from Ferny Grove

Something not covered? Call Tom on 0401 456 987.

I have just bought a house in Ferny Grove. Do I need to install a safety switch?

Only if the power points are not already protected. The seller must tell you in writing, on or before the possession day, whether an approved safety switch is installed. If it is not, you must have one fitted within 90 days after the possession day. Many Ferny Grove houses likely pre-date the 1992 rule that made switches mandatory in new homes, so check the notice early. Tom can inspect the board and fit the switch.

Why does my quote for a new power point include a safety switch?

Because the Electrical Safety Regulation 2026 says a licensed electrician must not do electrical installation work in a home whose power points have no approved safety switch unless the job includes installing one, apart from exceptions such as emergency work. In an older Ferny Grove house without one, the switch becomes part of the job. Altering one circuit only requires that circuit to be protected, while a full board replacement protects every applicable circuit, so you can choose.

I am selling my Ferny Grove house. What do I need to tell the buyer about safety switches?

You must give the buyer written notice, on or before the possession day, of whether an approved safety switch is installed for the home's power points. If one is missing, the buyer then has 90 days after possession to install it. Having Tom fit one before you list means the notice can say yes, and the certificate of testing and compliance shows the licence number of the contractor who tested it.

What paperwork should I get after electrical work on my Ferny Grove home?

A certificate of testing and compliance. After connecting electrical installation work, the licensed contractor must give you one as soon as practicable, stating what was tested, the test date and the contractor licence number, and must keep a copy for at least five years. Tom's certificates carry REC 13541. File it with the house papers, because a future buyer of a Ferny Grove house will ask about the safety switch.

I rent out a house in Ferny Grove. What electrical rules apply to me?

Every power point circuit in a Queensland rental must have a safety switch, and any electrical work must be done by a licensed contractor. If a tenancy starts while the power points are unprotected, you must have a switch installed within 90 days of the tenancy starting. More than one in five Ferny Grove homes is rented, so this is common. Fitting the switch before the lease, and checking the smoke alarms on the same visit, avoids a rushed job.

Do you have an office in Ferny Grove?

No. The business has one base, at 10 Jacksonia Drive, Warner, and Tom is usually out on jobs, so Ferny Grove work is booked ahead. Call 0401 456 987 to check availability. You can confirm contractor licence REC 13541 on the Electrical Safety Office licence search before booking, since electrical work in Queensland must only be done by a licensed contractor.

Sources

Need electrician in Ferny Grove?

Just bought in Ferny Grove, selling, or about to let a house? Book a switchboard and safety switch check before the paperwork or the 90-day window decides the timing for you. Request a free quote below, or call 0401 456 987 to check availability.

Call Tom on 0401 456 987