Bridgeman Downs lies in the City of Brisbane, 15.2 km from the city centre, and grew from acreage into residential estates in the late 1980s and early 1990s. That timing is the reason to look closely at its ceilings. Hardwired smoke alarms became compulsory for Queensland homes built or substantially renovated after 1 July 1997, and only from 1 July 2007 did every older home need at least a battery alarm. A house finished before mid-1997 may therefore have started with no required alarm at all and gained battery units later, while a later renovation may have added 240V alarms in some rooms. Only a look at each alarm tells you what is there.
Today's standard leaves less room. Each alarm must meet AS 3786-2014 with a photoelectric sensor and no ionisation sensor, every alarm must be interconnected so all sound together, and each must be hardwired or run on a non-removable battery built to last at least 10 years. Alarms must be replaced within 10 years of manufacture, and a hardwired alarm has to be replaced with another hardwired one.
Ownership patterns in the suburb make the sale trigger the one to plan around. At the 2021 Census 37.4% of homes were owned outright and the median age was 39, a profile of long-held family houses, and about one home in six was rented. Agreeing to sell, or starting or renewing a lease, requires the full standard straight away. An owner who does not install compliant alarms commits an offence.
Size sets the scope. With most homes at four or more bedrooms, a compliant layout needs an alarm in every bedroom, in the hallways that join them, and on each storey's likely path to an exit. Tom's own guide describes walking the house to count every bedroom and any room that could be slept in, mapping each level, checking the existing wiring, then fitting and testing each alarm so that one sets off the rest. Hardwired alarms are a licensed electrician's job, and Tom holds Queensland electrical contractor licence REC 13541.